Futuristic Technology 7.

Futuristic Technology 7

I created a toy figure using various broken pieces from other figures and added cogs and wooden sticks to it. This was a small maquette to highlight a connection between man and mechanical parts. I then moved on from this and created another piece, this was a small box filled with cogs and wires, although none of the cogs could move, I made this as a small palette of sorts to display what I wanted to use to create other 3D pieces. I then created a piece using another part from a broken toy figure, this one I had attached to cogs and when moved the body would spin, this was the start of the mechanical and autonomy of the 3D pieces I would be creating. From this point I created another piece, I used a small wooden frame and added various cogs that would connect to each other so that when one of the cogs move, all of them would move, I then added a smaller version of an arm I had created in one of my previous pieces of work so that it would spin around to create the effect of a robotic joint. I then created a 3D arm using a cut off sleeve filled with newspaper and created a hand for it. I made the hand appear robotic using paint and adding other smaller bits to create the mechanical feel. I used the frame I had made previously and made it appear as though the hand was reaching through as though it was a portal from the future I had created and was coming through it.